Performance Type: one woman musical Theatre Cast Size: Number of touring personnel: 5 Duration: approx. 100 minutes Setup Period: 2 days before the performance Logistics: No large props (All set props and equipment are transportable in a single mini cargo van) Audience Capacity per Session: The specific audience size will depend on the site conditions   Technical Rider Stage Dimensions 1. 100-300 person capacity: 8m x 5m stage 2. 500-800 person capacity: 12m x 8m stage To be provided by the Venue: 1. Load-bearing fly bars in the grid OR load-bearing rigging points on the ceiling structure. 2. Black dance floor vinyl / Marley floor (3.5mm thick) – Rolls 1.5m or 2m wide. 3. Black PVC floor border tape – Matching floor width. 4. Black stage skirting / masking drape – Height approx. 1.2m, length as per stage perimeter. 5. High-lumen projector – ≥8000 lumens. 6. HDMI cables. 7. Supertitle / captioning units (2 units). 8. Steam iron – Standard handheld type. 9. Folding table – Standard size (e.g., 180cm x 60cm). 10. White gauze cyclorama / scrim. LIGHTING EQUIPMENTS: 11. 2x large profile moving lights (e.g., Dream 1600 or equivalent). 12. 4x small profile moving lights (e.g., EK Smart or equivalent). 13. 2x vintage-style lights. 14. Assorted XLR-3 (3-pin) signal cables, power cables. 15. 2x Beam moving lights. 16. 4x LED panel lights. 17. 4x moving head wash lights. 18. 4x LED PAR cans. Audio Requirements I. PA Speaker System 1. The company requires the use of L, R, C, SUB, and F-F (Front-Fill) main PA speakers. If unavailable, advance communication with the company is required. 2. The company requires the use of the venue's surround speakers. If unavailable, advance communication is required. II. Monitor System 1. The venue must provide one Shure PSM1000 system with four Shure P10R beltpacks for company use. If unavailable, advance communication is required. 2. The venue must provide two active or passive floor monitors (wedge speakers) for company use. III. PA Console 1. A mixing console with a minimum processing capability of 8 input channels and 8 output channels is required. The console model must be communicated to the company in advance. IV. RF System 1. The venue must provide two wireless miniature headset microphones with corresponding receivers and transmitters (e.g., DPA 6060 + Shure AD1 transmitter + Shure AD4Q receiver). The console model must be communicated in advance. 2. The venue must provide two wireless handheld microphones (e.g., Shure AD2 transmitter + Beta58 capsule). V. Other 1. Dedicated power supply for audio equipment must be available at the FOH (Front of House) mixing position. 2. Should the company's cables be insufficient, the venue must provide corresponding cables (e.g., XLR cables, power strips, speaker cables, adapters). 3. AA batteries to be provided as requested by the company: 16 pieces per performance.